Blade Management Cards

DSVIEW3.5 currently supports blade chassis integration. Currently, their isn’t a dell selection to add as a blade chassis but you may add a generic appliance which will still add the Dell DKVM card chassis. Select the Generic Blade Chassis option (pic #1) and enter the MMB IP address and select a 10 port blade configuration. The ending result will show all 10 blades (pic #2). You are now able to launch the Management Console when you select the blade chassis.

Dell KVM Switch (All Dell CAT-5 KVM Switches) to Dell DKVM Card (1855/1955):

• Connect a PS2 SIP from the Dell ARI Server Port of the Dell KVM Switch
• The Local KVM Cable (Rear-Dongle #310-6485) Plugs to the Dell PS2 SIP
• Local KVM Port Plugs Directly to the SCSI Port of the Digital KVM Card

Dell KVM Switch (All Dell CAT-5 KVM Switches) to Dell AKVM Card (1855/1955):

• Connect a Single CAT-5 Cable from the ARI Server Port of the Dell KVM Switch to the ACI Port of the AKVM Card

No, the M1000e does not support Virtual Media functionality, and the Smart Card/Common Access Card type functionality is an extension of Virtual Media technology.